Okay, you guys asked for it, here it is. No, not a Youtube video, but a step by step tutorial
Storm Lancers -
Step 1:
I normally paint inside out,but since this model will contain a minimum of two different washes, I opted to go with an alternative method. Paint the bigger areas first.
Dry Brush entire model with Adeptus Battle Grey. Pay particular attentionto any showing parts of the horse.
Step 1 colors used - Adeptus Battle Grey (GW)
Step 2:
Paint all armor areas with Chainmail. Neatness is not so much a factor here as we will be repainting over a few areas in the next step I start from the top down ensuring each and every part that I want to be "armor" is painted that way
Step 2 colors used - Chainmail (GW)
Step 3:
Okay, now neatness counts. On the test model, I noticed the P3 paints do not cover silver so well. The metal shines thru, and I want a nice dark base, so time to "black out" all of the areas that are to be blue. I know from experience that Burnished Gold does not cover light areas too well either, so we'll black those out too. On the shoulder pads and, horse head, and flank armor, blackout just the insides with black, leaving the silver raised edges showing. Also, take this time to repaint any primered areas that have chipped during handling. I use Vallejo Game Color Black due to the nice consistancy.
Step 3 colors used - Chaos Black - Vallejo Game Color
Step 4:
Adding the Cygnar Blue is super easy, but again, neatness counts. Paint the inside of the head and flank armor, should guards, barding and the front of the shield with Cygnar Blue Base. This goes over black in a single smooth coat.
Step 4 colors used- Cygnar Blue Base (P3)
Step 5:
Okay, now the very last basecoating stage! At this point we are about 80% of the way done with the models! Using Burnished Gold, paint over the last of the blacked out areas! Make sure to hit the Cygnar falcon on the shield, shoulder and front bridle plate! Again, neatness counts here BIG TIME!!!!!!!
Step 5 Colors used - Burnished Gold (GW)
This is the stopping point for the night. No real back breakers here, and I spent 2 hours clock time painting (including smoke breaks and picture taking) Tomorrow starts the real fun as we start our washes, and finishing details!
Currently we have 5 colors used, but the last steps should increase that about 3-5 more colors!
Step 6 (1200 pm)
Wash entire model with Badab Black Wash. No need to thin it, as it is already thin enough.
Also, neatness isn't much of a factor here. Then Wait for the wash to dry.
Step 6 colors used - Badab Black Wash (GW)
Step 7
Grab your detail brush, as neatness is key on this step. Take Bestial Brown (Beasty Brown)
and pick out all the quilted armor and leather straps. Neatness is paramount here, because
for the most part, all the other areas are done!
Step 7 Colors Used - Bestial Brown (GW) or Beasty Brown (Vallejo)
Step 8
Again, detail brush and neatness rule supreme on this step. Grab your brown ink / wash
and start coating the areas painted in the last step. You can water the ink down a bit, but
we want a good dark coat! once that is done, timeto sit and wait for the ink to dry.
Step 8 Colors used - Brown Ink (GW) or Devlan Mud (GW)
Step 9
Part A
Now for the most time consuming part. Multi Stage Highlights on the blue parts of the armor
This is really easy enough. Starting at the bottom of the armor plate, leave a small gap
where the Cygnar Blue Base was washed showing and lightly paint upwards to the top of the armor plate.
Part B
Now mix a 50/50 mix of Cygnar Blue Base and Cygnar Blue Highlight, and apply about 2/3 of the way out on the plate.
Part C
Now add another smaller part at the top rounded edge of the plate with Cygnar Blue Highlight, and the highlights are done.
Part D
Reapply Cygnar Blue Base to all of the raised portions of the blue barding,and then apply a very thin line of Cygnar Blue Highlight to the Barding and that part is done.
Step 9 Colors used - Cygnar Blue Base and Cygnar Blue Highlight (P3)
Step 10
Repaint the Burnished Gold on the Cygnar symbols on the shield, horse chest bridle, and shoulder, and the model is done! Base and matte varnish, and then go play games!
